Nozzles
-
• Drift reduction in case of windy weather conditions up to 90%. • Compact design: allows Flat Fan nozzle easy replacement. • They can be fully removed for easier service. • Made of molded Delrin®, a polymer ensuring high chemical stability and an exceptionally long useful life. • Suitable for herbicides, fungicides and pesticides. Learn More
-
• Designed for boomless systems, where the use of a boom is not recommended due to the presence of obstacles. • Can be used as a boom-end nozzle to extend spraying range. • Large droplets have lower drift properties and can increase spraying effectiveness. • Delrin® body and ceramic insert (BX010, 020, 025 and 045 models only) for maximum durability. • Excellent for use on all crop types. • Ideal for golf green treatments using sprayers without boom and for systems on ATVs and quads. • Perfect for airport de-icing operations. Learn More
-
• Their jet angle ensures perfect fertilizer spreading. • Constant spray throughout the pressure range. • Specific for liquid fertilizers. • Perfect impact onto the soil so as not to damage crops if used at recommended pressure values. Learn More
-
• Steady 110° jet • Working Pressure of 1.5 bar - 7 bar Learn More
-
• 110° spray angle. • Drift Reduction Nozzle Learn More
-
• Steady 110° jet • Working Pressure of 1.5 bar - 7 bar Learn More
-
• 110° spray angle. • Drift Reduction Nozzle Learn More
-
110° Hardi flat fan nozzles. Learn More
-
Hardi ISO MINIDRIFT air inclusion nozzles. These nozzles provide coarse atomisation, as they are fitted with a venturi, which creates a negative pressure in the nozzle and causes air to flow in through the side holes. The mix of air and spray liquid generates the coarser atomisation and results in droplets being less sensitive to wind. Learn More
-
Hardi ISO LD-110 LowDrift nozzles are fitted with a restrictor which reduces the number of fine droplets compared to the standard nozzle.This makes the droplets of LowDrift nozzle less sensitive to wind. Learn More
-
Hypro Syngenta Defy 3D Angled Spraytip Nozzle Learn More
-
Hypro Gaurdian Air (Amnistar) Nozzles Guardian AIR™ nozzles produce smaller droplets than other air-induction nozzles, this means more droplets and better spray coverage. They offer a balance of excellent target coverage with reduced spray drift that can be fine tuned by the user. Guardian AIR™ nozzles are suitable for a wide range of crop spraying applications in several different sizes/colours. Learn More
-
Hardi ISO F-110 -Flat Fan Nozzle. Bodyless (without cap). Learn More
-
• Steady 80° jet • Working Pressure of 1.5 bar - 7 bar Learn More
-
ASJ Deflector Nozzle The ASJ Deflector manufactured by Arag in Italy, produces a wide angled spray pattern of 140 degrees commonly used for band spraying and also widely used in small Amenity and Lawn Tractor sprayers. They supply big droplets, thus reducing drift especially at low working pressures of 1-2 bars. Learn More
-
Hardi Quintastream ISO Nozzle. The unique design of the HARDI QUINTASTREAM ensures precise application of liquid fertilizer. Five [5] streams of liquid are distributed at different angles and flows by each Quintastream nozzle. Highest flow is from the middle stream and lowest in the outer, overlapping streams. Uniquely, this system allows for boom move- ments that do not influence distribution. Learn More
