Assorted Items & Accesories
Accessories
-
95L & 227L Sprayer Tanks
Pump and Manifold not included but option is here.
Shurflo pump and manifold:
- 13.2 L/Min
- 3.1 Bar pressure
- Comes with on/off switch and wiring to battery
- Pressure adjuster
- 2x 8mm hose outlets to boom/lance
-
5 Liter Foam ST. Recommended for use in winter, spring and for pre-emergency treatments. Part Number: 500014. Learn More
-
Salvarani Plug 3 Poles 12V.25A+M20. Part Number: BL-400554. Learn More
-
Prevents overdosage and the risk of missing marginal strips of land during operation. Adjustable foam production. Container made from hardwearing pressure-resistant polyethylene. Foam head made from impact-resistant EPDM.
Contents: Container cap with pressure relief valve Foam container Foam generator (x2) Attachment handle for foam generator (x2) Connecting lines for air/liquid Control unit Accessories/spare parts kit Instruction manual Container intake Unit made up of an electrical compressor and electrovalves Complete cabling Learn More
-
Used to connect more devices to 12V (Foam plotter, oil or water control box and monitors). Including fixing magnets on the back of the ABS plastic box. 40A fuse. 5 meter cable. Part Number: 906390. Learn More
-
Power cable suitable for connecting 2 12 Volt devices (eg TracciaFile, oil or water control boxes and electronic controls). 25 cm cable with three-pole plug. Part Number: 905627 Learn More
-
- Supplied with 3 different Venturi nozzles to adapt it to every type of pump.
- Mixing nozzle, suitable also for granular or powder products.
- Ø 455 mm lid to facilitate chemical product inlet.
- Rotating nozzle for chemicals tank cleaning
- Polyethylene tank with 30 l capacity
- Steel bearing frame with cataphoresis treatment.
- Integrated lifting handle.
-
- Supplied with 3 different Venturi nozzles to adapt it to every type of pump.
- Mixing nozzle, suitable also for granular or powder products.
- Ø 455 mm lid to facilitate chemical product inlet.
- Rotating nozzle for chemicals tank cleaning
- Polyethylene tank with 30 l capacity
- Steel bearing frame with cataphoresis treatment.
- Integrated lifting handle.
-
Spray Boom Support with Tube Connector Prevents booms hitting the ground. Extremely well made and are highly durable. Two in a Pack for the Price Listed. Part Number; 902546-S Learn More
-
Anti-Foam Product. Ideal to reduce the foam that may form in preparing solutions. Learn More
-
Cleaning Product. Special detergent for eliminating weed killer residue from agricultural machinery. Capacity - 1 Litre. Method of Use: After finishing your weed killing job empty all the weed killer out of the tank and rinse with an amount of water equal to 10% of the tanks total capacity. Rinse the tank with a 2% solution, start up the tanks cleaning cycle and leave it running for at least 20 minutes. Finally, empty the tank once again and rinse the tank and circuits with a solution of 0.1%. Learn More
-
Ramsey Repair Seal Kit 2 Options: For use with 1 1/2" or 2 1/2" Hosetails (See Pictures) Learn More
-
The ARAG protection kit has been designed to offer a basic protection for the use of crop protection chemicals. The kit is packed in a handy PVC bag and includes: 1 TYVEK breathable overall with hood and zipper 1 heavy-duty PVC-Polyester apron 1 goggles with anti-fogging lenses 2 anti-solvent masks with activated charcoal filling 2 anti-solvent nitrile gloves pairs with padded interior Learn More
-
ARAG Calibration Jug. Graduated jug for nozzle check/test. Part Number 925101. Learn More
